#3400 Two-Piece Edge Banding Bit Set, 3/4″

Adding hardwood banding to veneered plywood shelves and table tops is now a cinch! Both bits in this set are used in the router table and include a bearing for easy alignment. One bit will put a “V” shaped, concave profile in the plywood while the other bit forms a perfect match in hardwood. The mating “V” is put on a wide board then trimmed to width for safe operation. Top and bottom surface of the banding can be trimmed flush to the surface of the plywood using the router or hand plane. For use on stock that is less than 13/16″ in thickness.

Features:
•Adding hardwood banding to veneered plywood shelves and table tops is now a cinch!
•One bit will put a “V” shaped, concave profile in the plywood
•While the other bit forms a perfect match in hardwood.
•Top and bottom of the banding can be trimmed flush using the router or hand plane
•For use on stock that is less than 13/16″ in thickness