14" Steel Frame Bandsaw 1-3/4 HP 1 Ph 115/230V JWBS14-SFX

14″ Steel Frame Bandsaw 1-3/4 HP 1 Ph 115/230V JWBS14-SFX

122,89 $

SKU: SKU1PFPZY Categories: Bandsaws, Saws, Woodworking Machines Tag: Jet Brand: Jet

Description
Reviews (0)

The Jet® 14″ SFX Steel Frame Bandsaw redefines the line between functionality and affordability. The large, cast-iron table’s 360 square inches of work surface ensure greater workpiece support when making deep cuts. The machined aluminum fence system features easily visible measurements for the most accurate cutting. This saw is equipped with Jet’s blade guide system, making adjustments quick and simple. With over 13 inches of resaw capacity, the Jet 14″ SFX Steel Frame Bandsaw leads its class. Dual 4″ dust ports allow for maximum dust collection efficiency. The heavy-duty tubular steel welded construction, robust stamped steel doors with welded steel pin hinges, and heavy-duty base provide stability and durability when sawing large workpieces.

Features:

Deeper table with a massive 360 sq. in. of cast-iron work surface for greater workpiece support

Over 13″ resaw capacity for cutting large pieces of wood, slicing veneers, and cutting book-matched panels

Heavy-duty tubular steel welded construction with a total weight of over 300 lbs.

Dual 4″ dust ports for maximum dust collection efficiency

Independently adjustable, upper and lower ball bearing blade guides

Convenient 115V AC outlet location for optional accessories

Engineered die-cast and steel trunnion system allows for single joint adjustments when moving table

Larger machined aluminum fence surface with easily visible measurements for the most accurate cutting

Robust stamped steel doors with welded steel pin hinges for greater product durability

Cast Iron Wheels

Specifications:

Power: 1-3/4 HP

Voltage: 115 Volt (prewired) / 230V

Recommended Circuit Size: 20A

Motor Phase: 1 Phase

Motor Speed: 1720 RPM

Power Transfer: V-belt

Power Cord and Plug: SJT 14AWGx3C, 6 ft., 5-15P plug

Recommended Circuit Size: 20A (for 115V), 15A (for 230V)

Sound Emission without Load: 75 dB at 3 ft. (900 mm) from blade

Bandsaw Nominal Size: 14″

Bandsaw Wheel Diameter: 14″

Blade Length: 116″

Blade Width: 1/8″ to 3/4″

Cutting Capacity: 12″ W; 13.3″ H

Blade Speed: 3,000 SFPM

Wheel Speed: 765 RPM

Table Material: Ground cast iron

Table Insert Material: Anodized aluminum

Table Height: 40″

Table Size: 21-1/2″ x 17″

Table T-Slot: 3/4″ (x2)

Table Tilt: 45° R

Stand Type: Closed

Frame Material: Steel

Wheels: Cast iron

Tires: Polyurethane

Blade guides: Ball bearings, aluminum block

Resaw Fence: Extruded aluminum

Resaw Fence Size (L x W x H): 18-1/4″ x 6″ (463 x 155 mm)

Dust Collection Minimum Required: 350 CFM

Dust Port: 4″ Outer Diameter (x2)

Overall Assembled Dimensions (L x W x H): approximately 37″ x 27-1/2″ x 75-3/8″

Footprint (L x W): 24-7/8″ x 17-3/4″

Net Weight (approx.): 300 lb.

Warranty: 5-year JET Red Assurance

What’s Included:

(1) Jet® 14″ Steel frame bandsaw

(1) Steel stand

(1) Table with insert pre-installed

(1) Dust chute

(1) Resaw fence

(4) Hex wrenches, 2.5/4/5/6mm (not shown)

(1) Operating Instructions and Parts Manual

(1) Hardware pack

FAQs

What’s the actual resaw capacity of this bandsaw?

This bandsaw offers a resaw capacity of around 13″ making it suitable for cutting thicker stock and resawing boards. It’s well-equipped for a range of shop tasks.

How quiet is the motor when running?

The motor runs relatively smoothly with a moderate noise level typical of steel-frame bandsaws. It’s quieter than many older designs but still noticeable during operation.