10″ Table Saw with 50″ Rip Capacity Accu-Fence and Router Lift 5 HP 3 Ph 230/460V PM2000B

You’ll experience a vast array of patented features and a massive body design with the award winning Powermatic PM2000. The cast iron tables are oversized, and the newly designed arbor lock lever is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale features an integrated digital read out as well as adjustable angle indicators for repetitive bevel cuts.
The re-designed integrated retractable hydraulic caster system mobilizes your table saw much higher than the previous model to assist when moving over thresholds. A wide stance, heavy-duty box trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build-up. Improved built-in dust collection port with convenient access to the inside of the saw cabinet for simple clean-up. The saw has a proprietary safety switch with magnetic interlock and the stop button can be knee activated.

Integrated Digital Read Out for precise bevel cuts

Newly designed integrated hydraulic castor system with greater travel than previous model

Matching beveled edge between table and extension wings

Newly designed Arbor lock for quick and easy blade changes

Improved dust collection inside and outside of the cabinet

Quick release riving knife lever for hassle free riving knife changes

Wider stance, box trunnion design

Newly designed Accu-Fence system for precision cuts

CSA Certified

Router Lift Included

Motor: 5HP, 3PH, 230/460V, 13/6.5A

L x W x H (In.): 84.75 x 39.5 x 40.5

Net Weight (lbs):662 lbs.

Gross Weight (lbs): 739 lbs.

Style: Cabinet Saw

Prewired Voltage (V.): 230

Table Height from Floor (In.): 35

Maximum Diameter of Dado (In.): 8

Arbor Speed (RPM):4500

Maximum Rip Left of Blade (In.): 13-1/2

Table Size (In.): 22 x 30-1/2

Maximum Width of Dado (In.): 13/16

Blade Diameter (In.): 10

Table Type: Cast Iron

Maximum Rip Right of Blade (In.): 50

Dust Port Outside Diameter (In.): 4

Table T-Slot (In.): 3/4 x 3/8

Arbor Diameter (In.): 5/8

Recommended Circuit Size (Amps.): 20

Dust Collection Minimum CFM Required (CFM): 400

Table Size with Extensions (In.): 42 x 30-1/2

Maximum Depth of Cut at 90 Degrees (In.): 3-1/8

Maximum Depth of Cut at 45 Degrees (In.): 2-1/8

Table in Front of Saw Blade at Maximum Depth of Cut (In.): 11-1/4